Xerox Phaser 6600 Service Manual page 127

Initialize Slave
Procedure
1. Enter Service Mode to select [Engine Diag] > [NVM Settings], and press the OK button.
See "How To Enter Service Mode" on page 2-8.
Engine Diag
NVM Settings
2. Use the [ ] button to select [Initialize Slave], and press the OK button.
NVM Settings
Initialize Slave
3. Press the OK button.
Initialize Slave
Processing
4. Press the Back button to return to the [Printer Diag] screen, and then exit Service Mode. See "How
to Exit Service Mode" on page 2-10.
ROS Exposure
ROS Exposure corrects the ROS read registration when it has variation.
Procedure
1. Enter Service Mode. See "How To Enter Service Mode" on page 2-8
2. Confirm that the [Printer Diag] is selected, and press the OK button.
3. Use the [ ] button to select [Engine Diag], and press the OK button.
Printer Diag
Engine Diag
Use the [ ] button to select [ROS Exposure], and press the OK button.
4.
Engine Diag
ROS Exposure
5. Press the OK button.
6. Press the OK button.
Auto Correct
Processing
7. Press the Back button to return to the [Printer Diag] screen.
8. Exit Service Mode. See "How to Exit Service Mode" on page 2-10.
Xerox Internal Use Only
Auto Correct
OK?
Printer Diag
Engine Diag
Error Troubleshooting
NVM Settings
Edit NVM
Initialize Slave
OK?
Initialize Slave
Initialized
Engine Diag
Sensor Test
ROS Exposure
Auto Correct
Auto Correct
Corrected
Phaser 6600 and WorkCentre 6605
Service Manual
2-31