Feed Clutch Assembly - Xerox Phaser 6600 Service Manual

Feed Clutch Assembly

PL15.2.6 (Same as PL 10.1.8)
WARNING: The Fuser is very hot. Take added care when handling the fuser to avoid being burned.
1. Remove the Regi Chute Assembly. (page 4-86)
2. Unplug connector P/J392 on the harness coming from the Feed Clutch Assembly, and release the
harness from the harness guide.
3. Remove the E-ring holding the the Feed Clutch Assembly, and then pull the clutch off of the shaft.
Xerox Internal Use Only
Service Parts Disassembly
Phaser 6600 and WorkCentre 6605
Service Manual
s6600-082
4-91