Xerox Phaser 6600 Service Manual page 369

5. Remove the screw (silver, 6mm) that attaches the HV Ground Plate (PL18.1.15) to the printer and
remove the plate.
6. Release the harness from the Left Harness Guide (PL18.1.11).
7. Remove the two screws (silver, 6mm) that attach the Left Harness Guide to the printer.
8. Release the pawl holding the Left Harness Guide and remove the guide.
Xerox Internal Use Only
Service Parts Disassembly
Phaser 6600 and WorkCentre 6605
Service Manual
s6600-103
4-17