Xerox Phaser 6600 Service Manual page 270

Error Troubleshooting
WorkCentre 6605 Error Code List
Chain Link Error
133 282 Memory Pool Get
Error
133 283 Message Send
Error
133 286 OS Call Error
133 287 File Open Error
133 288 File Close Error
133 289 File Erase Error
133 290 Print Decode Error At JBIG data print decode,
134 211 Fax Card Modem
Error
142 700 IOT Over Heat
Forced Half
Speed
193 700 Custom Toner
Mode
2-174 Phaser 6600 and WorkCentre 6605
Service Manual
Error Details
Memory pool get error
(OS error)
Message send error (OS
error)
OS Call error
File open error
File close error
File erase error
decode error occurred
three successive times.
Fax Card parts error
(MODEM error)
IOT change half speed
due to over heat.
Custom Toner Mode
Control Panel Messages
Fax Error 133-282
Power Off/On the Printer.
If this failure occurs again, please
contact customer support.
Fax Error 133-283
Power Off/On the Printer.
If this failure occurs again, please
contact customer support.
Fax Error 133-286
Power Off/On the Printer.
If this failure occurs again, please
contact customer support.
Fax Error 133-287
Power Off/On the Printer.
If this failure occurs again, please
contact customer support.
Fax Error 133-288
Power Off/On the Printer.
If this failure occurs again, please
contact customer support.
Fax Error 133-289
Power Off/On the Printer.
If this failure occurs again, please
contact customer support.
Fax Error 133-290
Power Off/On the Printer.
If this failure occurs again, please
contact customer support.
Fax Error 134-211
Power Off/On the Printer.
If this failure occurs again, please
contact customer support.
XXXXXXXXXXXXXXXX
Over Heating. Running Half-speed
mode.
XXXXXXXXXXXXXXXX
Non-Xerox Toner Cartridge
Installed
FIP
location
Replace the
Fax Board.
Replace the
Fax Board.
Replace the
Fax Board.
Replace the
Fax Board.
Replace the
Fax Board.
Replace the
Fax Board.
Replace the
Fax Board.
Replace the
Fax Board.
-
-
Xerox Internal Use Only