Xerox Phaser 6600 Service Manual page 256

Error Troubleshooting
WorkCentre 6605 Error Code List
Chain Link Error
092 310 IOT CTD Sensor
Error
092 410 CTD Sensor
Dustiness
092 661 IOT Environment
Sensor Error
092 670 Yellow Patch Error IOT could not recovery
092 671 Magenta Patch
Error
092 672 Cyan Patch Error
092 673 Black Patch Error
093 320 IOT Deve Motor
Fail
093 423 IOT X Toner Near
Life
093 424 IOT X Toner Near
Life
2-160 Phaser 6600 and WorkCentre 6605
Service Manual
Error Details
Detect CTD Sensor Error
Detect CTD Sensor
Warning
Detect Environment
Sensor Error
toner density.
IOT could not recovery
toner density.
IOT could not recovery
toner density.
IOT could not recovery
toner density.
Detect Developer Motor
Failure
Y
M
Control Panel Messages
Density Sensor Error 092-310
Power Off/On the Printer.
If this failure occurs again, please
contact customer support.
Code:xxxxxxxx
XXXXXXXXXXXXXXXX
Clean Density Sensor
Temperature/Humidity Sensor
Error 092-661
Power Off/On the Printer.
If this failure occurs again, please
contact customer support.
Yellow Test Patch Error 092-670
Power Off/On the Printer.
If this failure occurs again, please
contact customer support.
Magenta Test Patch Error 092-
671
Power Off/On the Printer.
If this failure occurs again, please
contact customer support.
Cyan Test Patch Error 092-672
Power Off/On the Printer.
If this failure occurs again, please
contact customer support.
Black Test Patch Error 092-673
Power Off/On the Printer.
If this failure occurs again, please
contact customer support.
Developer Motor Error 093-320
Power Off/On the Printer.
If this failure occurs again, please
contact customer support.
XXXXXXXXXXXXXXXX
Yellow Toner Low
XXXXXXXXXXXXXXXX
Magenta Toner Low
FIP
location
Page 2-204
Clean the
CTD Sensor.
Page 2-179
Page 2-205
Page 2-205
Page 2-207
Page 2-207
Page 2-182
Replace the
Yellow Toner
Cartridge.
Replace the
Magenta
Toner
Cartridge.
Xerox Internal Use Only