Xerox Phaser 6600 Service Manual page 128

Error Troubleshooting
Dew Prevention
You can specify whether to set the Dew Prevention mode to ON or OFF.
Procedure
1. Enter Service Mode. See "How To Enter Service Mode" on page 2-8.
2. Confirm that the [Printer Diag] is selected, and then press the OK button.
3. Use the [ ] button to select [Engine Diag], and press the OK button.
Printer Diag
Engine Diag
4. Use the [ ] button to select [Dew Prevention], and press the OK button.
Engine Diag
Dew Prevention
5. Use the [ ] or [ ] button to switch to ON or OFF, and press the OK button.
Press the Back button to return to the [Printer Diag] screen.
6.
7. Exit Service Mode. See "How to Exit Service Mode" on page 2-10.
Initial IU
Procedure
1. Enter Service Mode. See "How To Enter Service Mode" on page 2-8.
2. Confirm that the [Printer Diag] is selected, and then press the OK button.
Use the [ ] button to select [IOT Diag], and press the OK button.
3.
Printer Diag
Engine Diag
4. Use the [ ] button to select [Initial IU], and press the OK button.
Engine Diag
5. Use the [ ] or [ ] button to select [Disable] or [Enable], and press the OK button to confirm the
setting.
2-32 Phaser 6600 and WorkCentre 6605
Service Manual
Dew Prevention
ON
Printer Diag
Engine Diag
Initila IU
Enable
Engine Diag
Sensor Test
Dew Prevention
OFF *
Engine Diag
Sensor Test
Initila IU
Xerox Internal Use Only