Xerox Phaser 6600 Service Manual page 93

Mutual Communication Ability
Characteristic
Communication Mode
Modem Signal Processing
Pixel Transmission Density (on the
supported transmission path)
Communication Image Size
Halftone/Compression Method
Communication Control Procedure
Nonstandard Function
Xerox Internal Use Only
Specification
Priority 1: ITU-T Super G3
Priority 2: ITU-T G3 ECM
Priority 3: ITU-T G3
Note: ITU: International Telecommunication Union
ITU-T: ITU Telecommunication Standardization Sector
ECM: Error Correction Mode
The following communication standards are supported:
• V.34 (33.6 /31.2 /28.8 /26.4 /24 /21.6 /19.2 /16.8 /14.4 /12 /9.6 /7.2
/4.8 /2.4kbps)
• V.17 (14.4 /12 /9.6 /7.2kbps)
• V.29 (9.6 /7.2kbps)
• V.27ter (4.8 /2.4kbps)
B/W:
• R16 x 15.4 line/mm
• R8 x 15.4 line/mm
• R8 x 7.7 line/mm
• R8 x 3.85 line/mm
• 400 x 400 pixel/25.4mm
• 300 x 300 pixel/25.4mm
• 200 x 200 pixel/25.4mm,
• 200 x 100 pixel/25.4mm
Color: Not supported.
Fast scan direction size on communication: 215 mm +/- 1%
B/W: 1bit, JBIG, MMR, MR, MH encoding
Color: Not supported.
Comply with ITU-T recommendation T.30.
Not supported.
General Information
Phaser 6600 and WorkCentre 6605
Service Manual
1-81