Xerox Phaser 6600 Service Manual page 153

Relay/Signal Test
Item
Relay Test Relay Toggle Test
Relay Set Test
Hook Test Hook Toggle Test
Hook Set Test
Single Tone Send 0Hz
400Hz
462Hz
1080Hz
1100Hz
1300Hz
1500Hz
1650Hz
1850Hz
2100Hz
500Hz
600Hz
900Hz
1000Hz
DTMF Send DTMF
Continuous
DTMF
Individually
Dial Pulse Send DP10
Individually
DP20
Individually
Ring Back Tone
Xerox Internal Use Only
Range Description
0150 - 9999 Toggles the Relay signal within the specified
frequency.
ON, OFF Outputs the Relay signal at a specified level.
0150 - 9999 Toggles the Hook signal within the specified
frequency.
ON, OFF Outputs the Hook signal at a specified level.
- Continuously sends the selected frequency tone.
0 - 9, A - D, *, # Continuously sends the DTMF signal.
16 digits Sends the multiple digits DTMF signal.
(each digit 0 - 9,
A - D, *, #)
10 digits Sends the multiple digits dial pulse (10pps)
(each digit: 0 - 9) signal.
10 digits Sends the multiple digits dial pulse (20pps)
(each digit: 0 - 9) signal.
- Sends the ringback tone.
Error Troubleshooting
Phaser 6600 and WorkCentre 6605
Service Manual
2-57