Xerox Phaser 6600 Service Manual page 366

Service Parts Disassembly
14. Remove the screw (silver, 6mm) that attaches the Left Sub-Top Cover (PL 19.1.10) and remove it.
15. Remove the Transfer 2 Link (PL19.1.4) from the Transfer Coupling Link.
CAUTION: When performing the following step to remove the Drive Assembly, use caution not to
drop the gears.
16. Remove the ten screws (silver, 6mm) that attach the Drive Assembly to the printer and remove the
drive assembly.
Note: When placing the Drive Assembly on the workbench, face the gear side upward to prevent
the gears from falling off.
4-14 Phaser 6600 and WorkCentre 6605Xerox Internal Use Only
Service Manual
s6600-105