Interface - SATO SG112-ex Operator's Manual

Media (Use consumables from our specified suppliers.)
Size
Continuous Mode
Pitch
(With Liner)
Width
(With Liner)
Tear-off Mode
Pitch
(With Liner)
Width
(With Liner)
Cutter Mode
Pitch
(With Liner)
Width
(With Liner)
Media Tray
Pitch
(With Liner)
Width
(With Liner)
Maximum stack height: 5 mm (0.2") (approx. 40 sheets, 0.12 mm (0.008") thick/sheet)
Note
When DISABLE is selected in PITCH SENSOR, the minimum label size varies depending on the print
speed. Refer to Section 8.7.17 When Sensor is Disabled
Thickness (Label and
liner)
8.8.3

Interface

Interface
Standard
30 to 420 mm (1.2" to 16.5")
33 to 423 mm (1.3" to 16.6")
128 to 297 mm (5.0" to 11.7")
131 to 300 mm (5.2" to 11.8")
40 to 420 mm (1.6" to 16.5")
43 to 423 mm (1.7" to 16.6")
128 to 297 mm (5.0" to 11.7")
131 to 300 mm (5.2" to 11.8")
40 to 420 mm (1.6" to 16.5")
43 to 423 mm (1.7" to 16.6")
128 to 297 mm (5.0" to 11.7")
131 to 300 mm (5.2" to 11.8")
40 to 117 mm (1.6" to 16.5")
43 to 120 mm (1.7" to 16.6")
128 to 297 mm (5.0" to 11.7")
131 to 300 mm (5.2" to 11.8")
Cut: 0.08 to 0.21 mm (0.003" to 0.008")
Feed: 0.08 to 0.27 mm (0.003" to 0.01"), use media with thickness of
0.12 mm (0.005") or greater for auto feed function.
USB Interface (Type B)
LAN Interface
RS-232C Interface
IEEE1284 Interface
External Signal Interface (EXT)
SD card slot
USB Host (Type A)
for details.
SG112-ex Operator Manual
8 Appendix
223