SATO SG112-ex Operator's Manual page 170

7 Troubleshooting
Error
No. Message
Parity error
03
Overrun error
04
Framing error
05
Buffer overflow
06
168
SG112-ex Operator Manual
LED/Buzzer
ONLINE: Flashes RS-232C settings are
green incorrect.
STATUS: Lights red.
The RS-232C cable is not
LABEL: Off
connected correctly.
RIBBON: Off
Three short beeps.
To clear the error:
Power off the
product.
ONLINE: Flashes RS-232C settings are
green incorrect.
STATUS: Lights red.
The RS-232C cable is not
LABEL: Off
connected correctly.
RIBBON: Off
Three short beeps.
To clear the error:
Power off the
product.
ONLINE: Flashes RS-232C settings are
green incorrect.
STATUS: Lights red.
The RS-232C cable is not
LABEL: Off
connected correctly.
RIBBON: Off
Three short beeps.
To clear the error:
Power off the
product.
ONLINE: Flashes The size of the received
green data from the host
STATUS: Lights red. exceeds the size of the
LABEL: Off receive buffer.
RIBBON: Off
The interface settings
Three short beeps.
between the product and
the host are incorrect.
To clear the error:
Power off the
product.
Cause Countermeasure
Set the interface settings
of the product again.
Power off the product,
connect the RS-232C
cable correctly, and then
power on the product
again.
Set the interface settings
of the product again.
Power off the product,
connect the RS-232C
cable correctly, and then
power on the product
again.
Set the interface settings
of the product again.
Power off the product,
connect the RS-232C
cable correctly, and then
power on the product
again.
Change the settings on
the host so that data that
exceeds the size of the
receive buffer cannot be
sent.
Set the interface settings
of the product and host
again.