Continuous Mode, Pitch Sensor Enabled And Pulse Input; (Head Check Enabled) - SATO SG112-ex Operator's Manual

8 Appendix
8.7.4 Continuous Mode, Pitch Sensor Enabled and Pulse Input (Head
Check Enabled)
(1) Operation
Standby
Print the 1st label
Print the 2nd label
(2) Timing chart
Label feed
Head check (TYPE1,2)
Head check (TYPE3,4)
External signal PRIN
PREND (TYPE1)
PREND (TYPE2)
PREND (TYPE3)
PREND (TYPE4)
Operation
206
SG112-ex Operator Manual
PRIN signal input
PRIN signal input
(1)
(Note)
The positions shown above are the base reference point when using the Gap sensor.
20 ms
Print 1st label
Waiting time until the product recognizes PRIN signal
*1. Maintain PRIN signal until PREND signal is output.
Print head Pitch sensor (Gap)
(1)
(1) (2)
(2) (3)
Print 2nd label
(2) (3)
(3) (4)
(4)