Installing The Top Cover - SATO SG112-ex Operator's Manual

1 Basic Information
1.1.1

Installing the Top Cover

The product is packed with the top cover detached. Attach the top cover to the product's main body
before using it.
Outer view of top cover
1
Align and match the shape of the top cover's bracket hole with the pin on the product
side.
2
Pull the pin on the top cover side to the left and align the tip of the pin with the hole of
this product.
3
Release the pin and make sure that the pin of the top cover has entered the hole of this
product.
18
SG112-ex Operator Manual
Inner view of top cover