Continuous Mode, Pitch Sensor Enabled And No Pulse Input; (Head Check Enabled) - SATO SG112-ex Operator's Manual

8 Appendix
8.7.2

Continuous Mode, Pitch Sensor Enabled and No Pulse Input

(Head Check Enabled)

(1) Operation
Standby
Print the 1st label
+ Head check
Print the 2nd label
+ Head check
Print the 3rd
label
+ Head check
(2) Timing chart
Label feed
Head check
External signal
PRIN
PREND (TYPE1)
PREND (TYPE2)
PREND (TYPE3)
PREND (TYPE4)
Operation
204
SG112-ex Operator Manual
Media feed direction
(1)
(1) (2)
Note
The positions shown above are the base reference point when using the Gap sensor.
Power ON
Print the 1st label Print the 2nd label
Print head Pitch sensor (Gap)
(1)
(1) (2)
(2) (3)
(3) (4)
Print the 3rd label
(2) (3)
(3) (4)
(4) (5)
(5) (6)