Test Print Mode - SATO SG112-ex Operator's Manual

4 Operation and Configuration

4.2.11 Test Print Mode

The flowchart shows the sequence of the setting screens for the test print mode. The table describes
each setting screen in detail.
CANCEL button
Note
• When EXTERNAL SIGNAL in the ADVANCED MODE menu is set to ENABLE, the product is unable to
perform the test print correctly.
Make sure that the EXTERNAL SIGNAL is set to DISABLE before performing test print.
130
SG112-ex Operator Manual
Press FEED button
+ Switch Power to On " I "
CANCEL button
When the above TEST PRINT
MODE Is set as
CONFIGURATION,
BARCODE or HEAD CHECK.
ENTER button
or
button
* Press the
select an item or set the value
accordingly. The active arrow icons
are shown on the screen.
* Pressing the FUNCTION button on
each screen will revert to the TEST
PRINT MODE menu.
ENTER button
When the above TEST
PRINT MODE Is set as
FACTORY.
ENTER button
or
button
or button
ENTER button
Test print
, , or button to
When the
above
TEST
PRINT
MODE Is
set as
FONT or
MEMORY.