SATO SG112-ex Operator's Manual page 87

AUTH PROTOCOL
Select SNMP authentication protocol.
The options are as follows:
• NONE
• MD5
• SHA-1
Note
The setting will be effective only if you power on the product again.
AUTH KEY
Input SNMP authentication key.
Input more than 8 characters for the authentication name.
/
Press the buttons to shift the cursor and press the
change the value.
Press the ENTER button to save the value and proceed to the next setting
screen.
Note
• When the authentication name is less than 8 characters, there will be
buzzer sounds and it will not move to the next screen.
• Up to 32 alphanumeric characters and symbols (from 20H to 7EH) can
be set.
• Specify " " to input a space.
• The setting will be effective only if you power on the product again.
PRIVACY PROTOCOL
Select SNMP privacy protocol.
The options are as follows:
• NONE
• DES
• AES
Note
The setting will be effective only if you power on the product again.
4 Operation and Configuration
/
buttons to
SG112-ex Operator Manual
85