3.4.2
Loading Media Roll
When using media roll, an optional UWG112
unwinder
is required.
for more details.
Note
Refer to the installation manual of the optional
UWG112 unwinder for more details.
1
Install the optional unwinder to the back of
the product.
Insert the end of the media feeder tray
is in between the product's rubber feet.
2
Loosen the securing screw on one side
of the media feeder spindle , align the
scale with the media width, and tighten the
securing screw .
Contact your SATO reseller
so that it
3 Loading the Ribbon and Media
1
2
4
3
SG112-ex Operator Manual
49