Quick Start Guide SX4M SX5M TXPSX4 TXPSX5 SATO Labeling Solutions America, Inc. Horticulture Division 930 Jimmy Ann Dr. Daytona Beach, FL 32117 Tel: (800) 874-4465 Fax: (800) 356-7650 www.satolabeling.com www.satoworldwide.com...
Page 2
Print head use and care instructions Table of Contents Thermal print heads are sensitive and can be easily Keep the print head clean. Use the print head cleaning damaged if mishandled. pen supplied with the printer to keep the printing element clean.
Setup and connection Communication errors Print quality problems Check cable connections to the printer and the The temperature setting may need to be changed. Parallel computer. Please contact Technical Support for assistance with Connection temperature settings. Contact Technical Support at 800-858-7425. Print head may be out of alignment and may need to be Serial adjusted.
Setting the feed gap sensor Loading the ribbon Reflective / Black Mark Sensor Transmissive / Gap Sensor Ribbon path Please note placement Please note placement NOTCHED ADHESIVE of transmissive sensor of reflective sensor TAGS LABELS in relation to tags/ in relation to tags/dotted lines dotted lines Correct Position Correct Position...
TXPSX4, TXPSX5 The label stock mounts onto the label shaft. Follow the SX4M & SX5M Label Guide label path as shown. It is easier to slide the label stock Loosen the thumb screw and adjust the label guide so...
Need help?
Do you have a question about the SX4M and is the answer not in the manual?
Questions and answers