Available Interfaces - SATO SG112-ex Operator's Manual

2.3.2

Available Interfaces

This product supports the following interfaces.
1) USB
Refer to Section 2.3.3 USB Interface Connection
for details on connecting the USB interface.
2) LAN
Refer to Section 2.3.4 LAN Interface Connection
for details on connecting the LAN interface.
3) IEEE1284
Refer to Section 2.3.5 IEEE 1284 Interface
Connection for details on connecting the IEEE 1284
interface.
4) RS-232C
Refer to Section 2.3.6 RS-232C Interface Connection
5) External signal (EXT)
Refer to Section 2.3.9 EXT External Signal Interface Connection
signal interface.
Note
• A product connected with multiple interface cables can continue to operate when receiving data. However,
you cannot receive data from more than one interface at a time. Normally, do not use multiple interfaces at a
time.
• The product prints the received data in order of reception. The next received data is stored in the receive
buffer while the first data is printed.
CAUTION
Do not connect or disconnect the interface cables (or use a switch box) while power is supplied to either the
product or computer. This may cause damage to the interface circuitry in the product or computer and is not
covered by warranty.
for details on connecting the RS-232C interface.
for details on connecting the external
SG112-ex Operator Manual
2 Installing the Product
1
2
3
4
5
29