Download Mode - SATO SG112-ex Operator's Manual

4.2.13 Download Mode

This download feature allows the operator to download data (firmware, font/logo, TrueType font,
configuration) from the host computer through the interface, SD card or USB memory and write in the
Flash ROM memory. When downloading is complete, the LCD screen will return to the original screen
after three seconds. If an error occurs, an error message will show and the reason will be identified.
The flowchart shows the sequence of the setting screens for the download mode. The table describes
each setting screen in detail.
CAUTION
Be sure to perform a virus check on the USB memory or SD card before connecting it to the product. SATO
Corporation shall not be held responsible for any product malfunctions caused by a virus spread via USB
memory or SD card.
Press button
+ Switch Power to On " I "
Select SD CARD or USB MEMORY + ENTER button
Select INTERFACE +
ENTER button
Waiting to receive data from the interface selected on the
DATA PORT screen of the interface mode.
Program
download
Indication of
new entry
After 3 beeps, the product returns to the DOWNLOAD READY screen.
Screen messages are displayed in English regardless of the
setting value on the SELECT LANGUAGE screen.
Download Font, Logo, TTF
* Continue to show
while receiving Font
or Logo information.
Indication of
overwriting
4 Operation and Configuration
Download
completed?
Deletion
3 short beeps
when the
download is
completed.
Yes
No
When downloading
the product
configurations,
verifying step is
skipped.
ENTER button
SG112-ex Operator Manual
135