Ieee1284 Interface; External Signal Interface (Ext) - SATO SG112-ex Operator's Manual

7.4.4

IEEE1284 Interface

No.
1 Check that the product cable is connected to the LPT port of the computer correctly.
2 Check that the cable is not damaged.
3 If you are using a Windows printer driver, check that the correct port is selected.
4 Check the configuration of the product.
Check the setting of the IEEE1284 interface through the INTERFACE MODE menu.
5 Connect to another port.
6 Power on the product again.
7.4.5

External Signal Interface (EXT)

No.
1 Check that the product and external device are connected with a cable correctly.
2 Check that the cable is not damaged.
3 Check that the power of the external device is on.
4 Check the configuration of the product.
Check the setting of the external signal (EXT) interface.
5 Power on the product and external device again.
Item to check
Item to check
7 Troubleshooting
SG112-ex Operator Manual
185