SATO SG112-ex Operator's Manual page 197

Note
• The folders under the [PR52] are created by formatting the memory card in the Memory mode.
• Make sure to format the memory card in the Memory mode. Refer to
details.
Formatting the memory card via Windows may result in data save failure or data reference failure.
• Do not change the file names and folder names under the [PR52] folder.
• Do not save files other than released (or uploaded) firmware or fonts in the [PROG] and [FONT] folder.
Doing so, the behavior of downloading or after downloading may be incorrect.
• Do not remove the memory card while the product is accessing to it. Doing so may damage or lose the data
in the memory card.
• When saving the data to the memory card by using the registration SBPL commands, the date of file
creation is according to the calendar if the real-time clock (calendar) kit is installed. If the real-time clock
(calendar) kit is not installed, the file creation date will be indicated by the firmware release date.
• Make sure that the product is powered off before inserting or removing the memory card. Otherwise the
product may not read or write the data properly.
Section 4.2.7 Memory Mode
SG112-ex Operator Manual
8 Appendix
for
195