1 Basic Information
1.3.3
Internal View
Ribbon rewind holder
Used to hold the ribbon core for winding up the
used ribbon.
Print head (Consumables)
Creates an image directly on the media or by
using a ribbon. Clean the print head regularly.
Media sensor assembly
This is where the media sensors are located.
Adjust the media guide to adjust the position of
the media sensors.
Top cover
22
SG112-ex Operator Manual
1
2
3
4
5
6
7
Ribbon supply holder
Used to hold the ribbon.
Head release lever
Used to release the print head assembly.
Platen roller (Consumables)