Continuous Mode, Pitch Sensor Enabled And No Pulse Input; (Head Check Disabled) - SATO SG112-ex Operator's Manual

8.7.1

Continuous Mode, Pitch Sensor Enabled and No Pulse Input

(Head Check Disabled)

(1) Operation
Standby
Print the 1st label
Print the 2nd label
Print the
3rd label
(Note)
(2) Timing chart
Power ON
Label feed
Head check
External signal
PRIN
PREND (TYPE1)
PREND (TYPE2)
PREND (TYPE3)
PREND (TYPE4)
Print the 1st label
Operation
Media feed direction
(1)
(1) (2)
The positions shown above are the base reference point when using the Gap sensor.
Print the 2nd label
Print head Pitch sensor (Gap)
(1)
(1) (2)
(2) (3)
(3) (4)
Print the 3rd label
8 Appendix
(2) (3)
(3) (4)
(4) (5)
(5) (6)
SG112-ex Operator Manual
203