Notification Function - SATO SG112-ex Operator's Manual

8 Appendix

8.4 Notification Function

This section shows the media motion when the set notification interval has been reached.
You can set the notification function in the
mode menu.
Standby
PRINTING...
Standby
After three seconds
Warning
message
196
SG112-ex Operator Manual
NOTIFICATION FUNCTION SETTING
Print head position
(1)
(1) (2)
Notification distance
has been reached.
(1) (2) (3)
(3)
• The counter is cleared by pressing the ENTER button while the
warning message is shown. (Start counting from 0 again.)
• When resuming printing without pressing the ENTER button, the
product enters the offline mode and the counter is not cleared.
(The warning is shown again while in standby mode.)
• When the LINE button is pressed, the product enters online or
offline mode from the warning screen. The same goes for other
buttons, entering each screen.
screen of the user
(2) (3)
(3)