Download Mode - SATO S84 Operator's Manual

4 Operation and Configuration

4.2.18 Download Mode

This download feature allows the operator to download data (firmware, font/logo, TrueType font,
configuration) from the host computer through the interface, SD card or USB memory and write in the
Flash ROM memory. When downloading is complete, the LCD screen will return to the original screen
after three seconds. If an error occurs, an error message will show and the reason will be identified.
The flowchart shows the sequence of the setting screens for the download mode. The table describes
each setting screen in detail.
Press the
+ Power On
Select INTERFACE
+
Program
download
After 3 beeps sound, the printer returns to the DOWNLOAD READY screen.
156 S84-ex/S86-ex Operator Manual
button
Screen messages are shown in English regardless of the
setting value on the SELECT LANGUAGE screen.
Select SD CARD or USB MEMORY +
button
Waiting to receive data from the interface selected on the
DATA PORT screen of the interface mode.
Download Font, Logo, TTF
Indication of Indication of
new entry overwriting
button
* Continue to show
while receiving Font
or Logo information.
completed?
Deletion
3 short beeps
sound when the
download is
completed.
button
Download
Yes
No
When downloading
the printer
configurations, the
verifying step is
skipped.
button