Download Mode - SATO CW408 Operator's Manual

Preliminary
Section 3: Operation and Configuration

3.17 DOWNLOAD MODE

This download feature allows the operator to download data (firmware, font/logo, Truetype font,
configuration), from the host computer through selected interface and write in the Flash ROM memory. When
downloading is complete, the display will return to the original screen after three seconds. If an error occurs,
an error message will display and identify the reason.
CAUTION:
• Downloading firmware will initialize all the previous settings (USER MODE, ADVANCED MODE).
Write down its setting details or keep a copy of FACTORY TEST PRINT for your information in
case you wish to maintain the same settings in the future.
• Do not set the power to on or off while downloading. This will damage the CONT board (main
PCB).
After 3 beeps sound, the printer returns to to the DOWNLOAD READY screen.
Page 3-44
MAINTENANCE MODE
MODE SELECT
DOWNLOAD MODE
Select DOWNLOAD MODE +
FEED button
Waiting to receive the data
DOWNLOAD MODE
from the selected interface.
DOWNLOAD READY
Download font and logo
Program
download
Indication of
new entry
DOWNLOAD MODE
RECEIVING. . .
DOWNLOAD MODE
WRITING. . .
DOWNLOAD MODE
VERIFYING. . .
DOWNLOAD MODE
PROGRAM DOWNLOAD
COMPLETED
DOWNLOAD MODE * Continue to display
while acquiring font
FONT DOWNLOAD
or logo information.
READY
Indication of
Deletion
overwriting
DOWNLOAD MODE DOWNLOAD MODE
DELETING. . . DELETING. . .
DOWNLOAD MODE
RECEIVING. . .
DOWNLOAD MODE
WRITING. . .
DOWNLOAD MODE DOWNLOAD MODE
FONT REGISTRY FONT DELETE
COMPLETED COMPLETED
CW408 Operator Manual