Komatsu Galeo PC800-8 Shop Manual page 764

Hydraulic excavator
Table of Contents

Advertisement

SEN00793-02
Double-wiper specification
Failure
• Windshield wiper and window washer do not
phenomenon
work
Relative
information
Defective lower wiper
1
switch
(Internal disconnection)
Defective lower wiper
2
motor
(Internal disconnection)
Possible causes
Disconnection of wiring
and standard
harness
3
value in normal
(Disconnection or defec-
state
tive contact with connector)
Defective machine monitor
(Lower wiper switch
system)
4
Defective machine monitor
(Lower wiper motor
system)
Note: When the upper wiper and lower wiper are operated simultaneously: Max. 3 V
intervals)
38
Cause
Standard value in normalcy and references for troubleshooting
aTurn the engine starting switch OFF for the preparations, and hold it in
the OFF position during the troubleshooting.
S08 (female)
Between (1) – (2)
aTurn the engine starting switch OFF for the preparations, and hold it in
the OFF position during the troubleshooting.
aTurn the engine starting switch OFF for the preparations, and hold it in
the OFF position during the troubleshooting.
Wiring harness between CM02 (female) (15) –
S08 (male) (1)
Wiring harness between S08 (male) (2) – J05 –
J30 – J14 – chassis ground
Wiring harness between CM01 (female) (10) –
J02 – M15 (male) (3)
Wiring harness between M15 (male) (1) – J05 –
J30 – J14 – chassis ground
aTurn the engine starting switch OFF for the preparations, and hold it in
the ON position during the troubleshooting.
(15) – chassis ground
aTurn the engine starting switch OFF for the preparations, and hold it in
the ON position during the troubleshooting.
(10) – chassis ground
(2) Lower windshield wiper does not operate.
Lower wiper switch
M15 (female)
Between (3) – (1)
CM02
Lower wiper switch
Between
CM01
Lower wiper switch
Between
40 Troubleshooting
Resistance
OFF
Min. 1 Mz
Max. 1 z
ON
Continuity and resistance
Continued
Resis-
tance
Resis-
tance
Resis-
tance
Resis-
tance
Voltage
OFF
20 – 30 V
ON
Max. 1 V
Voltage
OFF
Max. 3 V
ON
20 – 30 V (Note)
20 – 30 V (at regular
PC800, 850-8
Max. 1 z
Max. 1 z
Max. 1 z
Max. 1 z

Advertisement

Table of Contents
loading

Table of Contents