Komatsu Galeo PC800-8 Shop Manual page 1086

SEN01059-01
a In addition to the above parts, apply
the primer to right side window glass
(1) and door lower window glass (3).
Range to apply primer additionally for
q
right side window glass (1): (b)
Range to apply primer additionally for
q
door lower window glass (3): (c)
a After applying the primer, leave it for
at least 5 minutes (within 8 hours) to
dry.
a Never apply wrong primer. If the glass
primer is applied by mistake, wipe it
off with white gasoline.
8
50 Disassembly and assembly
4) Evenly apply glass primer to the sticking
surfaces of window glass (9).
2
Glass primer:
SUNSTAR GLASS PRIMER
580 SUPER or equivalent
a Do not apply the primer more than 2
times. (If it is applied more than 2
times, its performance will be low-
ered.)
a Parts to be coated with primer: Apply
the primer to the sticking surfaces of
window glass (9) and all over dimen-
sion (d) which will be on both-sided
adhesive tape (6) and operator's cab
(8).
a Do not apply the primer to the
boarder about 5 mm wide between
the black part and transparent part of
the glass.
a After applying the primer, leave it for
at least 5 minutes (within 8 hours) to
dry.
a Never apply wrong primer. If the glass
primer is applied by mistake, wipe it
off with white gasoline.
PC800, 850-8