Komatsu Galeo PC800-8 Shop Manual page 1034

SEN01057-01
Assembly
1. Assemble slipper seals (7) and O-rings (6) to
swivel rotor.
2. Set swivel shaft (5) on block [2], then using
push tool [1], tap swivel rotor (4) with a plastic
hammer to install.
2
Contact surface of rotor, shaft:
a When installing the rotor, be extremely
careful not to damage the slipper seal and
O-ring.
3. Install ring (3) and secure with snap ring (2).
4. Fit O-ring and install cover (1).
3
Mounting bolt:
66.15 ± 7.35 Nm {6.75 ± 0.75 kgm}
30
Grease (G2-LI)
50 Disassembly and assembly
1
2
3
4
7
6
5
PC800, 850-8
CEP00381