Komatsu Galeo PC800-8 Shop Manual page 399

30 Testing and adjusting
6. Function for confirming working mode and
travel speed
After the display of machine inspection before
day's work, amplified symbol marks for working
mode and travel speed are shown for 2 seconds
to urge an operator to confirm the setting.
7. Function for display of ordinary items
The display of confirming working mode and
travel speed is switched to this display of ordi-
nary items.
a If the working mode setting or travel speed
setting is changed, or auto-deceleration or
windshield wiper setting is activated while
this is in display, an amplified corresponding
symbol mark is shown for 2 seconds.
a In this display, a symbol mark for preheat
monitor is shown only when preheating is
carried out.
PC800, 850-8
8. Function for adjusting display luminance and
contrast
Luminance as well as contrast of the display can
be adjusted by operating the display adjusting
switch.
9. Function for confirming maintenance infor-
mation
Detailed information on maintenance items (set
time and elapse of time) can be confirmed and
resetting after the confirmation is feasible by
operating the maintenance switch.
a Use Service Menu for setting or releasing
maintenance items and setting maintenance
time.
SEN00913-02
5