Komatsu Galeo PC800-8 Shop Manual page 1103

50 Disassembly and assembly
Installation
Carry out installation in the reverse order to
q
removal.
[*1]
When connecting connectors (3), (4), and (8),
check that there is no dust, dirt, etc. in them.
a Reference
Method of replacing O-ring seal of power
q
connector (4)
O-ring seal: 1010-074-0406 (NIHON-DEUTSCH
LIMITED)
1) Using tweezers [1], hold the claw and
remove cover (6).
2) Using tweezers [1], remove O-ring (7).
PC800, 850-8
SEN01060-01
5