Komatsu Galeo PC800-8 Shop Manual page 1082

SEN01059-01
20. Using lever block, lift off operator's cab assem-
bly (39).
4
Operator's cab assembly: 300 kg
a When starting the engine while the operator's
cab is removed (for transportation, etc.), use
the following brackets.
1) Bracket (41) for controller (40)
Part No.: 208-53-13920
2) Bracket (42) for monitor panel assembly
(30)
Part No.: 208-53-13910
4
50 Disassembly and assembly
Installation
Carry out installation in the reverse order to
q
removal.
Reference
Connection of window washer hoses
1) Hose length from clamp end of part (A): Con-
nect to the hose on the floor side at 150 mm.
2) Hose length from clamp end of part (B): Con-
nect to the hose on the tank side at 200 mm.
a Cut the extra part of each hose perpendicu-
larly to it. (See the lower right of the figure.)
3) Insert each hose end (HE) in joint (J) securely
until it touches joint (J). (See the upper right of
the figure.)
PC800, 850-8