Komatsu Galeo PC800-8 Shop Manual page 409

30 Testing and adjusting
Operation and Display of Service Menu
Way of switching to Service Menu
a When using Service Menu, change the display
to Service Menu display through the following
special operation.
1) Confirmation of display
Confirm that the display of ordinary items is
shown.
a Changing to Service Menu cannot be made
from displays other than this.
2) Switch operation
Operate the switch as instructed below.
Switch operation: [E] + [1] o [2] o [3]
•
(Enter a figure, depressing [E])
PC800, 850-8
3) Showing Service Menu display
The display is changed to the initial display of
Service Menu program. Select an appropriate
item from among the menu.
No.
00 Return (Termination of Service Menu)
01 Monitoring
02 Abnormality Record
03 Maintenance Record
04 Maintenance Mode Change
05 Phone Number Entry
AAAAA / Default
06
07 Adjustment
08 Cylinder cut out
09 No injection cranking
4) Termination of Service Menu function
When terminating the initial display or any sub-
sequent display of Service Menu, do that
through any one of the following methods.
[1] Depress [ ] switch. (This method may be
used for terminating any display)
[2] If "Return" switch is shown, depress it.
[3] If "Return" menu is shown, call that menu
and depress [
SEN00913-02
Service Menu
] switch.
15