50 Disassembly and assembly
10. Remove cover (23) and floor mat (24).
11. Move right console (25) into the cab.
12. Remove monitor panel undercover (26).
13. Disconnect cab wiring connector W04 (27)
(Wiper motor).
14. Remove ducts (28) and (29).
a Both (28) and (29) are 2 in number.
a Cut the tie-wrap on the monitor wiring har-
ness.
a Sling the monitor assembly and cab
together.
a When removing the monitor assembly,
remove cover (30) in advance.
PC800, 850-8
15. Disconnect radio antenna (31).
16. Remove clip (32) and take wiring harness (33)
out of grommet (34).
17. Take grommet (35) out of the right front of the
cab.
18. Disconnect the windshield washer hose from
(36).
19. Remove 4 mounting bolts (37) and 5 mounting
bolts (38).
a Check the types of the bolts.
SEN01059-01
3