Komatsu Galeo PC800-8 Shop Manual page 421

30 Testing and adjusting
2) Selection of submenu
Select an item to change from the submenu,
and depress [
AAAA
No.
00 Return
01 Key-on Mode
AA
02 /Language
03 Unit
04 Wiper Select
05 All Default Value
3) Function for Key-on Mode
When the engine starting switch is turned
ON, a working mode can be set that is
shown in the machine monitor.
• P Mode, E Mode, Swing Priority Mode
OFF/ON: If any of them is set, the ma-
chine always ramps up with that working
mode, when turning the engine starting
switch ON.
• Mode at Previous Key-off: If this mode is
set, the machine ramps up with the
working mode that was last used in the
previous machine operation.
• Default Value: If this mode is set, the
machine ramps up with the default mode
(P mode) that was originally set at the
time of delivery from the factory.
PC800, 850-8
] switch.
/Default submenu
4) Function for AA/Language
In Service Menu, the language in use can
b e c h a n g e d b e t w e e n J a p a n e s e a n d
English.
a English is used as the language for de-
fault setting in the machine monitor.
a If the machine monitor for spare parts is
to be used in a Japanese-speaking re-
gion or organization, change the lan-
guage from English to Japanese, using
this function.
5) Function for unit selection
As the unit to be used in the monitoring
function display of Service Menu, three
kinds of unit are provided.
a Unit used for default setting in the ma-
chine monitor is SI, i.e. International
System of Units.
SEN00913-02
27