Komatsu Galeo PC800-8 Shop Manual page 1030

SEN01057-01
Installation
Installation shall be made in the reversed
q
procedure of the removal procedure.
3
Swing motor assembly mounting bolt:
926.7 ± 102.9 Nm {94.5 ± 10.5 kgm}
Filling the oil (Hydraulic tank)
q
a Fill the oil to the stipulated level from the
oil filler port and circulate the oil inside the
piping. After that, re-check the oil level.
a Fill the quantity of the oil which leaked
when the motor assembly was removed.
26
50 Disassembly and assembly
PC800, 850-8