Komatsu Galeo PC800-8 Shop Manual page 972

SEN01055-01
iv) Assemble holder (4) to shaft (5).
v) Tighten bolt (3).
2
Bolt: Thread tightener (LT-2)
3
Bolt:
927 ± 103 Nm {94.5 ± 10.5 kgm}
vi) Install thrust washer (50).
2) Using eyebolts [2], install No. 3 carrier
assembly (2).
a Align the low portion (4 places) of
spacer (19) and shaft (41) with the
carrier assembly holder.
a Align the bolt holes also.
30
50 Disassembly and assembly
13. No. 3 sun gear
1) Install thrust washer (11) to No. 3 sun gear
(10).
2) Install No. 3 sun gear (10).
a Be careful not to get your fingers caught.
14. Cover
Using eyebolts [1], install cover (1).
2
Mounting surface:
2
Bolt: Thread tightener (LT-2)
3
Bolt: 980.1 ± 49.5 Nm {100 ± 5 kgm}
Gasket sealant (LG-6)
PC800, 850-8