Komatsu Galeo PC800-8 Shop Manual page 1032

SEN01057-01
Installation
Installation shall be made in the reversed
q
procedure of the removal procedure.
[*1]
a Regarding the port positioned in the lower sec-
tion of the swivel joint, install the swivel joint so
that the "A port" may be directed to the front-
RH side.
Filling the oil (Hydraulic tank)
q
a Fill the oil to the stipulated level from the
oil filler port and circulate the oil inside the
piping. After that, re-check the oil level.
a Fill the quantity of the oil which leaked
when the swivel joint assembly was
removed.
28
50 Disassembly and assembly
PC800, 850-8