Komatsu Galeo PC800-8 Shop Manual page 957

50 Disassembly and assembly
3) Turn over case and pinion assembly, then
remove mounting bolts (28) of cover
assembly (27).
4) Turn over case and pinion assembly (29),
and set on press stand.
5) Using push tool F3, remove pinion shaft
assembly (30) with press.
a Set a wooden block under the press,
and be careful not to damage the pin-
ion shaft assembly when removing it.
10. Disassemble pinion shaft assembly as follows.
1) Using push tool [1], remove cover assem-
bly (27) and bearing (31) from shaft (32).
2) Remove oil seal (33) from cover (27).
PC800, 850-8
11. Bearing
Using push tool, remove bearing (34) from
case (35).
27
28
CEP00215
35
SEN01055-01
34
CEP00220
15