Komatsu Galeo PC800-8 Shop Manual page 961

50 Disassembly and assembly
2) Align position of pin holes of shaft and car-
rier, then tap with a plastic hammer to
install shaft (6).
a When installing the shaft, rotate the
planetary gear, and be careful not to
damage the thrust washer.
3) Insert pin (5).
a After inserting the pin, caulk the pin
portion of the carrier.
a After assembling the carrier assembly,
check that gear (9) rotates smoothly.
9. No. 1 carrier assembly
Install No. 1 carrier assembly (4).
4
PC800, 850-8
10. No. 1 sun gear
1)
2)
11. Cover
Install cover (1).
2
3
12. Refilling with oil
CEP00207
Tighten drain plug and add oil through oil filler.
5
Assemble No.1 sun gear (3) to carrier
assembly.
Install thrust washer (2).
3
Cover mounting surface:
Gasket sealant (LG-6)
Mounting bolt:
1st pass: 98 Nm {10 kgm}
2nd pass: 105 ± 5°
Swing machinery case: Approx. 24.3 l
SEN01055-01
2
CEP00206
1
CEP00205
19