Komatsu Galeo PC800-8 Shop Manual page 419

30 Testing and adjusting
No. Maintenance mode change item
Return (Termination of maintenance
00
mode change)
01 Maintenance Mode On/Off
02 Engine Oil Exch. Int.
03 Engine Oil Filter Exch. Int.
04 Fuel Main Filter Exch. Int.
41 Fuel Pre Filter Change Int.
05 Hydr. Oil Filter Exch. Int.
06 H/Tank Breather Exch. Int.
07 Corro. Resis. Exch. Int.
08 PTO Oil Service Int.
09 Final Drive Oil Exch. Int.
10 S/Machinery Oil Exch. Int.
11 Hydraulic Oil Exch. Int.
12 Pilot Filter Exch. Int.
13 Drain Filter Exch. Int.
14 Use Default Values
a 01 and 14 menus are provided for setting the
whole maintenance mode, while those from
02 through 13 are for setting individual items.
3) Contents of Maintenance Mode On/Off
• Use: The maintenance display function
of all oil and filter-related items are
turned effectual. (Irrespective of whether
"On" or "Off" set for individual items, this
setting prevails)
• Do not use: The maintenance display
function of all oil and filter-related items
are turned ineffectual. (Irrespective of
whether "On" or "Off" set for individual
items, this setting prevails)
PC800, 850-8
4) Set contents of individual items
[1]: Default: The maintenance time set in
the monitor (recommended by the man-
ufacturer and cannot be changed).
[2]: Set: Maintenance time that can be
freely set. The maintenance mode pro-
gram functions based on this mainte-
nance time. (The maintenance time can
be increased or decreased by 50 hours
with [E] or [R] switch)
[3]: On: Maintenance display function with
this instruction becomes effectual.
[4]: Off: Maintenance display with this
instruction becomes ineffectual.
a The lowest maintenance time is 50 h.
5) Set contents of "Use Default Values"
When selecting this menu and depressing
the switch [ ], all individual time settings
are reduced to the initial settings.
SEN00913-02
25