Komatsu Galeo PC800-8 Shop Manual page 437

Hydraulic excavator
Table of Contents

Advertisement

30 Testing and adjusting
2. Display contents of 7-segment and dots for CPU
a Turn ON the starting switch prior to inspection of LED display.
No.
Display unit
Name and function
Number of mails which
are not sent yet and sat-
7
7-segment
ellite capturing condi-
tion)
State of positioning with
8
Dot
GPS
*2: Types of flashing and flashing duration
Quick flashing: Flashing of approximately 1.0 second cycle.
Slow flashing: Flashing of approximately 4.0 seconds cycle
*3: Remarks on measuring condition of GPS
In a outdoor location within radio waves penetration range, it sometimes takes more than a minute from
turning on of the starting switch to completion of the positioning.
Positioning is not available in a location where radio waves are extremely weak or unreachable.
PC800, 850-8
Display (*2)
Figure indicates number of mails which are not sent yet
Lighting of
(When 10 or more mails are not sent yet, 9 is indicated).
0 – 9
Lighting indicates that satellite is captured.
Quick
Figure indicates number of mails which are not sent yet
blinking of
(When 10 or more mails are not sent yet, 9 is indicated).
0 – 9
Quick blinking indicates that satellite is not captured.
ON
Positioning with GPS complete (Position is recognized, *3)
Positioning with GPS incomplete (Position is not recog-
OFF
nized, *3)
SEN00914-02
Contents of display
7

Advertisement

Table of Contents
loading

Table of Contents