Komatsu Galeo PC800-8 Shop Manual page 410

SEN00913-02
16. Function for monitoring [01]
The machine monitor monitors signals from an
assortment of switches, sensors and actuators
installed in various parts of the machine. Moni-
tored information can be put in display or con-
firmed on a real time basis through the following
operations.
1) Selection of menu
Select "01 Monitoring" in the initial display of
Service Menu and depress [
2) Setting of monitoring item
Select or register an item to be monitored
through the following switch operation.
• [E] switch: Selection
• [R] switch: Selection
• [ ] switch: Registration
a A monitoring item can be set in any number
between the min. one to the max. four. (De-
pending upon the selected item, the max.
number is less than four)
a In case of monitoring 1 to 3 items, move to
the monitored information display through
any of the following switch operations, after
the registration work has been completed.
• Keep [ ] switch depressed. (For about
3 seconds)
• Select Menu 99999 and depress [
switch.
16
] switch.
]
a The display automatically moves to the dis-
play of monitored information, when all of the
registrable items have been duly registered.
a Monitored information are transmitted via
communication circuits. Thus the number of
selected items can impact the communica-
tion speed. If truly real time monitoring is re-
quired, reduce the selected items to the
minimum.
a For details on the monitoring items, display
unit, etc., refer to the Table for Monitoring
Items.
3) Monitoring operation
Call the monitoring information display and
confirm the monitored information, while
operating the machine.
4) Monitored information holding function
If [E] switch is depressed while monitoring,
all the monitored information are put on
hold. If [R] switch is depressed in this con-
dition, information holding is released.
30 Testing and adjusting
PC800, 850-8