Komatsu Galeo PC800-8 Shop Manual page 956

SEN01055-01
5. Ring gear
Lift ring gear (12) and remove it.
6. No. 1 sun gear
1) Remove thrust washer (13).
2) Remove button (36) and spacer (14).
3) Remove No. 1 sun gear (15).
4) Remove thrust washer (16).
a Remove No. 2 carrier assembly (17)
before removing the washer.
14
50 Disassembly and assembly
7. No. 2 carrier assembly
Lift No. 2 carrier assembly (17) and remove it.
8. Disassemble No. 2 carrier assembly as follows.
1) Push in pin (18), and knock out shaft (19)
from carrier (17).
a After removing the shaft, remove pin
(18).
2) Remove thrust washer (20), gear (21),
bearing (22), and thrust washer (23).
19
22
20
21
23
18
9. Pinion shaft assembly
1) Remove bolt (24), then remove holder
(25).
2) Remove gear (26).
26
17
CEP00213
24
25
CEP00214
PC800, 850-8