Komatsu Galeo PC800-8 Shop Manual page 1077

50 Disassembly and assembly
Installation
Carry out installation in the reverse order to
q
removal.
[*1]
k
When aligning the mounting position of the
pin, do not insert your fingers in the pin hole.
a Adjusting the lifting height of the boom assem-
bly so that the boom foot is at the height of the
mount on the chassis.
a Bleed the air from the work equipment circuit.
For details, see Testing and adjusting, "Bleed-
ing air from hydraulic cylinder".
After completion of the air bleeding operation,
add engine oil to the hydraulic tank to the
specified level.
PC800, 850-8
SEN01058-00
27