Komatsu Galeo PC800-8 Shop Manual page 946

SEN01055-01
18. Remove belt cover (21) from the air condi-
tioner compressor.
19. Loosen locknut (22).
20. Remove the mounting bolts and disconnect air
conditioner compressor (23).
a Do not disconnect the air conditioner hoses.
21. Remove air conditioner compressor belt (24).
22. Remove right and left mounting bolts (25). [*2]
23. Disconnect clamp (26).
24. Remove right and left mounting bolts (27). [*3]
a The nut plate falls at this time. Take care.
25. Install M30 eyebolts (B) to the right and left and
sling engine and PTO assembly (28) tempo-
rarily with sling [6].
a RF: Rear frame
4
26. Float engine and PTO assembly (28) a little.
4
Engine, PTO assembly:
a Since clearance (A) is narrow, take care
that valve cover (BC) of the engine will not
[*1] touch fan guard (FG).
27. Support engine and PTO assembly (28).
k
Loosen sling [6] and check that engine
and PTO assembly (28) is supported.
28. Strain sling [6].
29. Remove mounting bolts (29).
50 Disassembly and assembly
Approx. 3,000 kg
PC800, 850-8
[*4]