Komatsu Galeo PC800-8 Shop Manual page 298

SEN00386-03
Method of checking status
Maintenance items
a Operate as follows when on the operator
screen.
1. Press maintenance switch (1) and switch to the
maintenance list display screen.
a The maintenance items are displayed as
symbols on the screen.
2. Press control switch (2), or use the 10-key pad
to input the number (01 – 10, 30, 31, 41) of the
maintenance item to select the item.
a The cursor moves and the item is highlight-
ed.
a The display method is the same as de-
scribed on the previous page (relationship
between remaining time and caution dis-
play). If the remaining time is less than 30
hours, the item is displayed in yellow, and if
it is less than 0 hours, it is displayed in red.
Maintenance operation
1. After completing the selection, press input con-
firmation switch (3).
The screen will change to the maintenance
reset screen.
2. Use the maintenance reset screen to check the
content, and if there is any problem, press input
confirmation switch (3) to move to the check
screen.
If the wrong item is selected, press return switch
(4) to return to the maintenance list screen.
3. Check the content on the check screen, and if
there is no problem, press input confirmation
switch (3) to reset the maintenance time.
After the reset is completed, the screen returns
to the maintenance list display screen. To check
the remaining time, or if the wrong item is
selected, press return switch (4) to return to the
maintenance list screen.
a The check screen shows the symbol for the
maintenance item and the set time in large
letters.
a The background color of the symbol for the
item where the maintenance item was reset
is the same as the background of the screen,
so it is possible to check that it has been re-
set.
56
10 Structure, function and maintenance standard
PC800, 850-8