Komatsu Galeo PC800-8 Shop Manual page 1091

50 Disassembly and assembly
a After installing front window glass (4),
fill the clearances between it and cen-
ter trim seal (16) with caulking material
in range (s) to dimensions (t) and (u).
After applying the primer to glass (4)
of section A – A, apply adhesive as
caulking material.
Caulking dimension (t): 2 mm
q
Caulking dimension (u): 5 mm
q
a When caulking, mask the glass side
and form the adhesive with a rubber
spatula as shown in the figure.
a Wipe off projected adhesive.
2
Glass primer:
2
Adhesive: SUNSTAR PENGUINE
SEAL 580 SUPER "S" or "W"
PC800, 850-8
SUNSTAR GLASS
PRIMER 580 SUPER
8. Fix the window glass.
1) After installing right window glass (1) to
the operator's cab, insert stopper rubbers
Y2 to 2 places (v) at the bottom of the
glass to fix the glass.
2) Using styrene foam blocks [9] and rubber
bands [10], fix the window glass and both-
sided adhesive tape to fit them completely.
SEN01059-01
13