Komatsu Galeo PC800-8 Shop Manual page 1092

SEN01059-01
9. After installing the window glass, remove the
primer and adhesive from the operator's cab
and window glass.
a Using white gasoline, wipe off the adhe-
sive before it is dried up.
a When cleaning the glass, do not give an
impact to it.
10. Protect the stuck window glass.
1) Keep the stopper rubbers, styrene foam
blocks, and rubber bands installed for 10
hours (at temperature of 20°C and humid-
ity of 60%).
2) After removing the stopper rubbers, sty-
rene foam blocks, and rubber bands, wait
at least 14 hours, at least 24 hours in total,
before operating the machine actually.
14
50 Disassembly and assembly
PC800, 850-8